AUTONET TV

What Clovis Customers like About Us at Triple A Automotive

A big part of the service we provide at Triple A Automotive for our Clovis customers is education. We want you to feel confident with your service decisions.

And we're always open to questions from our valued Clovis area customers. Even though we try to be proactive in our Triple A Automotive automotive education, we sometimes get busy fixing vehicles and need a reminder. Please, just ask.

We've found our Clovis customers like the service reminders. They've grown to trust that our recommendations are based on the vehicle manufactures’ published maintenance schedules and that Triple A Automotive is not just pulling them out of the air.

We know that people in Clovis live a busy life with a lot more to think about than wondering if it's time to replace the PCV valve on their vehicle. Part of our Triple A Automotive service process is checking the vehicle manufacture's schedule to make sure we don't overlook service.

We hope CA drivers appreciate their courtesy inspection when they come into our Clovis facility for service. If we find something unexpected, it's good to know, and if we don't find anything wrong, you get a little peace of mind.

You know, customer satisfaction is very important to us at Triple A Automotive. We want to run a professional and friendly Clovis automotive service operation. If we do, you'll keep coming back and recommend us to your friends.

Give us a call at (559) 299-9300.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Timing is Everything (Timing Belt)

Talk about exquisite choreography; it happens under the hood of your vehicle every time you take a drive.  Your engine’s many complex parts must work exactly together.  One key is a part called a timing belt, which enables the synchronizing of two of your engine’s components, the camshaft, and the crankshaft.  

The timing belt coordinates the valves in your engine to open and close at the appropriate time to get exhaust out of the engine’s cylinders. Timing belts may also power the water pump and the oil pump.  The belt is made of rubber.  Some engines use a timing chain (made of metal). 

Your vehicle’s manufacturer recommends an interval after which you should have your timing belt or chain replaced, and that service should be part of your vehicle’s regular maintenance.  It’s always better to replace it before it breaks rather than after.  After all, if your timing belt breaks while you’re driving down the road, it throws off the whole sync of engine parts and can cause major damage to the type of engines most commonly used in vehicles today.

It's also important to remember that a timing belt is made of rubber, and rubber deteriorates with time, no matter how much use it gets. Have us look at your timing belt to see if it’s time to get it replaced.  

Here are some signs to look for that will let you know if your timing belt is failing. You might have trouble starting your vehicle, it may misfire or black smoke may come out the tailpipe. If you notice any of those symptoms, bring your vehicle in and have us take a look right away.  When it comes to your engine, timing is everything.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Prepare Your Windshield for Winter (Wiper Blades and Fluid for Freezing Temperatures)

Winter and freezing temperatures present challenges for different parts of your vehicles.  For example, winter tires give you better traction on snow.  But some parts of your vehicle that may need special attention for winter are your windshield wipers. You may have found yourself in the middle of a snowstorm when your windshield wipers are doing nothing but streaking slush that ices up on contact on the glass.  Now you're more blind than you were before!

Obviously being able to see during a snowy or icy winter event is important for the safe operation of any vehicle.  So keeping your windshield and rear window clean can go a long way to guarantee you can see your surroundings.

Let's start with the wipers.  Blades that are good for hot weather may not be robust enough for freezing weather. You can buy special winter wiper blades that stay flexible during sub-zero temperatures.  The stiffer frames that hold them have a rubber covering that prevents ice and snow from building up.  Another style is beam wipers that have a one-piece design, intended for use all year long.  Since these have no separate frame, ice can't build up like on traditional frame wipers.  

If you've ever had salty road brine kicked up on your windshield, you know it can blind you in a second.  So you absolutely must have windshield washer fluid available to clear your vision.  The fluid you use during the warm weather months will often freeze below 32°F/0°C, and that can actually make things worse by icing up your windshield when you spray it.  Worst of all, it may freeze in your washer reservoir.

Be sure to use washer fluid that is meant for sub-freezing temperatures; special formulas will remain a liquid in weather as cold as -30°F/-34.4°C.  Some contain alcohol to keep them flowing; some have a little antifreeze that will melt snow and ice.  If you do use these liquids, make sure to keep them away from small children and pets because they're poisonous if they drink them. 

Each climate is different, and there are windshield products to meet your needs.  Your service advisor can recommend which ones will work best for you.  The idea is in winter, you need to be able to see. 

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Them's the Brakes (Brake Rotor Resurfacing)

Your vehicle's brakes wear out.  It's inevitable. You'll notice it when you step on the brake pedal and feel it harder to stop, or there's vibration when you are braking. 

Most modern vehicles have disc brakes that each use a brake pad that press on a disc (disc brakes!) called a rotor.  The friction between them enables you to stop, and each time you do a little bit of the pad and the rotor wears down.

The original brakes on vehicles used a rotor that was thick enough to last through at least two replacements of the pads.  But vehicle manufacturers who want to save costs and weight now make them thinner, and sometimes the rotors have to be replaced after the first pad replacement.  But not always.

Vehicle manufacturers specify a minimum thickness to provide safe braking.  Sometimes rather than having to have your rotors replaced, they can be put on a lathe and resurfaced.  In other words, the surfaces of the disc can be slightly shaved off so the surface is flat and doesn't wobble. 

Whenever you bring your vehicle in to have the brakes checked, the technician will measure the thickness of the rotors to see if they can be resurfaced without leaving them too thin for safe braking. If they can, with the right tools and skill, the rotors can be resurfaced.  If not, the rotors should be replaced. 

Discuss the options with your service advisor.  Our service center can recommend replacements that are designed to help stop your vehicle as well as or better than the vehicle's original rotors.

Either way, keep in mind that keeping your brakes in top condition can supply the margin of safety that may one day save your life or the lives of those around you.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com