AUTONET TV

Blind Spot Safety for Clovis Driving

Blind spots may be a good thing when it comes to a spouse's annoying habits, but when driving an automobile in Clovis, they are definitely to be avoided. So, while it's not good marital advice, it's good auto advice to minimize your own blind spots and stay out of other Clovis drivers' blind spots, especially when it comes to large, heavy vehicles like trucks and buses.

First, minimize your own blind spots. Do this before you pull out of the driveway or parking space. Adjust your rearview mirror so that you see as much of the area behind you as possible. And, no, this doesn't include the passengers in the back seat. The rearview mirror isn't designed to be a baby monitor.

Next, lean to the side until your head almost touches the driver's side window. Now adjust the driver's side mirror so that it just catches the side of the vehicle. Then, lean to the middle of the car and adjust the passenger's side mirror in the same way. These adjustments will ensure you the widest possible view behind your vehicle.

Of course, you can't eliminate blind spots entirely. There is always an area behind any vehicle where the driver just can't see what's there. The bigger the vehicle, the bigger the blind spot. Toddlers are just the right size to hide in a pickup's or SUV's blind spot. The blind spot on an RV or tractor-trailer can actually hide your crossover! You should always check behind any vehicle before getting in and backing up. And if you sit in the vehicle for a few minutes before backing up, it is best to get out and check again, especially if you are pulling out of a neighborhood driveway in Clovis. No precaution is too extreme if it saves the life of a child.

Trucks may cause about 60% of the accidents involving a truck and a car, but 78% of fatalities in such accidents are with the smaller vehicle. The number of fatalities in CA, as well as the number of crashes, could be cut significantly if Clovis drivers learned to properly share CA roads with trucks.

While learning to share CA roads and freeways with trucks and other large vehicles may not seem like preventive auto maintenance, it does, in fact, go hand-in-hand with good car care. Keeping your vehicle out of the body shop can save you big bucks and prevent the stress of a major accident, along with the injuries that could come with it.

The team at Triple A Automotive in Clovis urges you to stay safe, and stay on the road!

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Why a Trip Inspection Is a Good Idea

At Triple A Automotive we get a lot of Clovis drivers asking about vehicle trip preparation. That's a big deal. You could be driving through mountains and deserts in some pretty lonely areas around CA, so it's important to know that the vehicle is up to the task and won't leave you stranded.

Smart Clovis drivers plan ahead for a major road trip – and there are a lot of things to get ready. Where should you start? You could start with the tires. Look them over for tread wear and check to see that they are properly inflated. Take a quick test drive around Clovis to see if you can feel any vibrations: Are the wheels in balance? Is the car tracking straight? Is the alignment ok? Come to Triple A Automotive for a peace-of-mind trip inspection.

972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

The next thing is a full service oil change to make sure all of your fluids are topped off and you have fresh oil for the trip. And if your car has over 75,000 miles/120,000 km, you may consider putting in the high-mileage formulation to clean harmful sludge deposits in the engine. 

How about your transmission and brakes? Have you had your transmission and brakes inspected in the last six months?

How are your wiper blades? There's nothing like not being able to get rid of the bug juice on a long road trip away from Clovis.

Check your owner's manual for any other recommended services, and have Triple A Automotive in Clovis do the multi-point inspection before you head out on your trip.

Consider also having the coolant system serviced at Triple A Automotive – you want to stay within the vehicle manufacture’s recommendations. If you're towing a trailer around CA you'll want to be keep in mind that you'll be going a long way under severe conditions.

A lot of Clovis drivers overlook severe conditions like towing, CA summer heat or driving on dirt roads. Plan ahead for your next road trip – Triple A Automotive wants you to get there and back.

See the Light (Automatic High Beam Dimmers)

It's happened to all of us.  We're driving down a highway at night and over a crest appears a car with its high beams blazing.  You are momentarily blinded, hoping the other driver will switch them to their low beam setting and restore your vision.

Not only do we not appreciate being blinded, face it; we don’t want to be that other driver, either.  You know, the one who forgets to turn down their high beams.

Why do we want high beams in the first place? They can improve safety when used correctly, giving drivers more reaction time since they can see farther down the road.  But research has found many drivers either don't use them or, when they do, they frequently forget to switch to low beams.  Enter the automatic high-beam dimmer.

The quest for the perfect one began back in the 1950s, General Motors invented something it called the "Autronic Eye." It was a phototube which sat on the dashboard and turned down your beams when it saw other headlights.  While touted as being the biggest advance in night driving safety in 30 years, it didn't work all that well.  But as technology got more advanced, systems improved.

Today's automatic high beam dimmers usually have a camera in the rear view mirror (pointing forward).  When the camera sees lights, software in the system's computer attempts to determine the source of the light, whether it is an oncoming vehicle, taillights, ambient city lights, street lights or the reflection off of a street sign.  It then adjusts the headlights to operate high beams if appropriate or a less-blinding mode if they’re not.

Some automakers are striving to make their headlight systems smarter and safer by developing lamps that can avoid blinding oncoming drivers by means other than simply dimming them. One idea? Splitting the beams so they will block just the portion that shines into the eyes of oncoming drivers.

It's a long way from the Autronic Eye. 

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Time for a Brake (Brake Pad Replacement)

Stop! It's one of those things your vehicle has to do consistently and reliably.  That's why brake maintenance is vitally important, worthwhile for you to make sure stays up to date.

A brake system has many components. If your vehicle has disc brakes, they have pads that make contact with the rotors (the metal discs).  Those pads usually have a metal back, and the part that presses against the discs is made of a material which provides friction to stop the vehicle. Because of that friction, the pads are expected to wear down and eventually the rotors will, too.  But the pads usually are the part that will need to be replaced more often. But how do you know when it's time?

There are several signs, one of which is when your brakes squeak or make a high-pitched sound when you step on the brake pedal.  Many newer vehicles also have sensors on the brake pads.  When the pads get worn down to a certain point, the sensor will tell the vehicle's computer to turn on a light on the instrument panel.  When that light comes on, it's time to have your service facility check out what's going on.  If you don't know what that light looks like, ask your service advisor or look it up in the owner's manual.

Some vehicles also give you a reminder based on the distance you've traveled. It may be a message that displays on the dash or a light that illuminates. 

Your best bet is to have your vehicle regularly serviced at one shop you trust.  They will keep a record of your brake maintenance Then, when you take your vehicle in for oil changes or other routine things, they'll check your brakes for wear.  Sometimes you'll only need pads, but you may also need rotors or other parts replaced.  Oh, and you need pads replaced in pairs. That way stopping power will be equal on both sides and your vehicle won't pull in one direction. 

Brakes make up a key part of your vehicle's safety systems.  Keep them in good shape and they'll be able to stop your vehicle when you press down that pedal.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

The Light Nobody Wants to See (Check Engine Light)

You've probably had your Check Engine Light go on.  Then it goes off and you figure, hey, whatever the problem was, it's gone now and I don't have to worry about it.  Well, the problem may have gone away and it may not have.

Your vehicle likely has one of these warning lights on the instrument panel: an amber light that looks like an engine or reads "Check Engine" or "Service Vehicle Soon."  If that light comes on and stays on, it usually means there's something amiss but not urgently in need of service.  (Now if it's blinking, that's another story that we'll deal with in a minute.)

Sometimes when it comes on and stays steadily lit, the problem will go away and the light will go out.  Sometimes it will stay on until you get the problem fixed.  Either way, the engine's computer will store a code that can provide clues to what's not working—or wasn't working—the way it's supposed to.

If you are just dying to know what that code is, you can buy a little code reader or take your vehicle to an auto parts store and they'll read it.  Problem is, the code offers so many options that unless you are a trained technician, you probably won't have a clue what those codes mean. 

So if you want to be sure, take it to your vehicle repair facility and have them check it.  Technicians are trained to decipher the codes and, using their experience and other diagnostic equipment, can get to the root of the problem and fix it. 

As we mentioned before, if that Check Engine light comes on and is blinking, it means a more serious engine malfunction that can damage expensive components such as the catalytic converter and even the engine itself.  It's important to have that checked by a professional as soon as possible. 

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Keep Your Cool in Clovis

Clovis drivers rely on their vehicle's coolant system to keep their engine cool. Coolant (also called antifreeze) mixed with water flows through your vehicle engine and absorbs heat. The mixture then flows out to the radiator where it's cooled by air flowing over the radiator. From there the coolant/water mix circulates back through the engine to absorb more heat.

There's a reason we mix coolant and water. Water alone actually does a good job transferring heat from the engine. The problem is that water boils at a temperature that's easily reached inside your vehicle's engine, so it can turn to steam which does not conduct heat as well and is harder to contain.

Also, if it's freezing outside in Clovis, the water in your engine could freeze while your vehicle is sitting out in the CA cold.

So, if you remember your high school chemistry, you'll know that a mixture has both a higher boiling point and a lower freezing point than either component alone.

Coolant, or antifreeze, is specially formulated to keep your engine safe in a wide range of environmental and operating temperatures in and around Clovis.

Whenever your vehicle is running, the coolant in the cooling system is working to keep your engine from overheating. When it's cold outside, the coolant acts as antifreeze to keep the fluid from freezing in your engine.

All that exploding fuel in your engine creates a lot of heat. Without coolant, the metal vehicle engine parts would expand so much that the engine would seize up and stop running. The parts could be broken or warp so badly they would have to be replaced. It could even be so bad that the whole vehicle's engine is ruined and has to be junked.

This is why it is critical that Clovis drivers check coolant levels frequently and have their vehicle's cooling system inspected for leaks. Also your vehicle has a maintenance requirement for draining and replacing your coolant. These recommendations can vary widely, so check your owner's manual or ask us at Triple A Automotive in Clovis.

The reason Clovis drivers need to change the coolant is that it has additives in it to protect the cooling system. As you can imagine, with all the heat, the cooling system's a pretty harsh environment. The additives keep the fluid from becoming corrosive and damaging the radiator and other vehicle cooling system components. Over time, the additives are depleted and the coolant just has to be replaced.

Many Clovis auto owners ask our advisors at Triple A Automotive why there are different colors of antifreeze. It is very important that you use the correct type of antifreeze. The different types of antifreeze – or coolant – are different colors so you don't mix them up.

They use different materials to make the cooling system, and they require different types of antifreeze to protect them.

So check with us at Triple A Automotive in Clovis or your owner's manual for the right kind because using the wrong coolant can void the warranty for your vehicle cooling system.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com