AUTONET TV

Bad Vibes (Disc brake rotor problems)

If you were to name the most important safety feature on your vehicle right now, what would your answer be? A lot of driving experts would agree that it’s your brakes.  Most newer vehicles use a well-engineered and efficient style of brakes called disc brakes. 

The name disc brakes comes from one of the components: a disc attached to the wheel hub that is squeezed by parts called calipers.  If you’ve ever ridden a bicycle with hand brakes, you probably have seen how they squeeze against the rim of the bike wheel to stop the bike. It’s similar to the way your vehicle’s calipers squeeze against the disc rotor, with added parts called brake pads attached to the calipers that are what create the friction and stop your vehicle.

Here’s why disc brakes need regular maintenance.  Over time, that friction creates wear and tear on the brake pads and the rotors, and you’ll start to see the signs.  Your brakes may have one of the 3 “S” sounds: squeaking, squealing, or scraping. The sound is usually the first sign of brake pad wear which can lead to rotor damage.  Soon you may notice a pulsating or vibration when you brake. That’s because your once smooth and straight rotor disc is warping from the heat generated from friction. Or it may be due to wear.  Eventually, your brakes will take a longer distance to stop your vehicle, and the rotors can have grooves carved into them.

When you start noticing any of these signs, it’s a good idea to have them inspected by a trained technician.  They will measure the rotor thickness, check wear patterns for grooves and heat discoloration, and see how much of the brake pads remain. They will also check to make sure all brake components are moving freely, check your brake fluid, and look for corrosion.

Most vehicle manufacturers require worn or damaged rotors to be replaced, not resurfaced. It’s all part of a complete brake job, replacing pads and the brake hardware parts along with the rotors. It reduces the chance of premature failure.

How often you will need your brakes serviced depends on the manufacturer’s recommendations, your driving habits, and the environment you live in.  Your service facility can recommend the best replacement parts based on those factors. 

Regular maintenance and attention are vital for keeping your brakes performing like they are designed to. Remember, your brakes are your vehicle’s most important safety feature.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

When Are Your Tires Worn Out?

Hey Clovis area drivers, are your tires worn out? What is the standard for our CA streets? How can you tell on your vehicle?

While there may be legal requirements for the Clovis area, there are safety concerns that go beyond meeting minimum replacement mandates.

Two-thirty-seconds of an inch is the depth of the tire tread wear indicator bars that US law has required to be molded across all tires since August 1, 1968. When tires are worn so that this bar is visible, there's just 2/32 of an inch – 1.6 millimeters – of tread left. It's that level of wear that's been called into question recently.

We're referring to the tread depth on a tire, it can't move surface water out of the way and you start to hydroplane.

In a safety study, a section of a test track was flooded with a thin layer of water. If you laid a dime on the track, the water would be deep enough to surround the coin, but not enough to cover it.

A car and a full-sized pick-up accelerated to 70 miles per hour, or 112 kilometers an hour, and then made a hard stop in the wet test area. Stopping distance and time were measured for three different tire depths:

• New tire tread depth
• 4/32 of an inch, or 3.2 mm
• 2/32 of an inch, or 1.6 mm

So what happened with the 2/32 inch/1.6 mm tires on the car? Get this – when the car had traveled the distance required to stop with new tires, it was still going 55 mph/89 kph. Stopping distance was nearly doubled to 379 feet/116 meters, and it took 5.9 seconds.

Wow! That means if you barely have room to stop with new tires, you would hit the car in front of you at 55 mph/89 kph with the worn tires.

Now, with the partially worn tires – at 4/32 of an inch, or 3.2 mm – the car was still going at 45 mph/72 kph at the point where new tires brought the car to a halt. It took nearly 100 feet, or about 30 meters, more room to stop and 1.2 seconds longer. That's a big improvement. We can see why Consumer Reports and others are calling for a new standard.

Of course, stopping distances were greater for the heavier pick-up truck.

How do you know when your tires are at 4/32 inch or 3.2 mm? Easy; just insert an American quarter into the tread. Put it in upside down. If the tread doesn't cover George Washington's hairline, it's time to replace your tires. With a Canadian quarter, the tread should cover the numbers in the year stamp.

You may remember doing that with pennies. A penny gives you 2/32 inch, or 1.6 mm, to Abraham Lincoln's head. The quarter is the new recommendation – 4/32 inch, or 3.2 mm.

How do people feel about replacing their tires earlier? Well, tires are a big ticket item and most people want to get the most wear out of them that they can. But do you want that much more risk just to run your tires until they are legally worn out?

For us, and we would guess for many, the answer is "no".

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Getting the Right Tires and Wheels in Clovis

A lot of people get custom wheels in Clovis. When you do this yourself (over the internet . . .) you could run into trouble if you're not careful. Sometimes, once they're mounted, they just don't fit right. The tires rub in turns or on bumps. You don't want that.

Consulting your Triple A Automotive tire professional can ensure you get the right fit. First he'll ask you a series of questions about your Clovis driving needs and what you want in your new wheels. Now, not every wheel can go on every car. Care must be taken so that tires and wheels are not too large or that the wheel is centered too far towards the outside or the inside so the tires rub.

If you don't want to make any modifications to your vehicle, you would need to focus on the wheels that would fit. With trucks, some people in Clovis like much bigger tires so they need a suspension lift.

Also, most Clovis drivers don't realize that you need to keep the rolling diameter of your new tires – the overall height of the tire – very close to what came from the factory in order for your vehicle's anti-lock brakes and stability control systems to work properly.

The computers that control these systems are calibrated to a certain size tire. When you go bigger or smaller, the computer doesn't know what changes you made so it can't tell how fast you're going. This, of course, means it sends commands to the brakes and traction control that are based on the wrong speed. If you go with a different rolling diameter, your vehicle engine control computer can be reprogrammed for the new tire size.

Either way, there are hundreds of wheel and tire choices to choose from in CA. You can pick the style of wheel you want and then talk with your friendly and knowledgeable Triple A Automotive tire professional about how big the wheel should be – and how to select the right tire for your vehicle. Your Triple A Automotive service advisor will help you find the best tire to meet your style, performance, ride and handling needs in Clovis.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

What is a TSB? (Technical Service Bulletins)

If your vehicle had something in its design or production that the manufacturer had figured out had an unanticipated problem, you'd want to know about it. And you'd want it fixed. There is something that can help drivers with just such a scenario. It's called a Technical Service Bulletin, or TSB.

Here's what a TSB is. Vehicle design and manufacturing is a very complex process. Aftrer every vehicle is introduced, the more units there are on the road, the more likely weaknesses in parts or design will start to show up.

Automakers gather data on the issues and how best to fix them. Then they send out TSBs (usually in the first year of the new model) so technicians will know to look for those problems and what to do about them. There may be more than one cause of a problem with a vehicle so there may be more than one TSB for an issue.

A TSB can be issued for anything from failing water pumps to strange noises to smelly headliners. A TSB and a recall aren't the same thing. A recall is issued if there's a problem that could cause harm to people or if it creates illegal emissions. The manufacturer pays for a safety defect to be fixed, and the repair is usually performed at a dealership.

But when a Technical Service Bulletin is issued, it's because there's a pattern of some system not working the way it should. If a vehicle is under warranty and the problem can be diagnosed in a specific vehicle, the manufacturer will probably pay for the repair. But there may be limits. Take one case with certain models of a minivan. Some wheel bearings were failing prematurely, so the manufacturer extended the warranty on them to 5 years or 90,000 miles/145,000 km. After that, the owner bore the cost. In some cases, a manufacturer will reimburse owners for a repair already done at an independent service facility.

You may have a vehicle that is no longer covered by a warranty but a TSB has been issued for a certain problem. In that case, any service facility can perform the service. At Triple A Automotive, your service advisor will have access to TSBs that have been issued for your vehicle's year and model. They will help the technician diagnose it if your vehicle has the issue. The TSB will also have advice for the best repair procedure to get your vehicle working the way it should.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com