AUTONET TV

In the Hot Seat (Repair and Maintenance of Seat Heaters)

It's chilly outside. You flip on that switch that looks like a picture of a seat with little heat waves rising from it.  You expect soon you'll feel that warmth but… wait! It's not getting warmer.  Oh no, what's wrong with my seat heater? There could be lots of reasons it's not working, and it could be as simple as a fuse or as major as the heating element itself.  But it's something to leave to a pro to diagnose and repair.

Let's say it turns out to be a blown fuse.  Simply replacing the fuse may not fix it because there was a reason the fuse blew in the first place.  It's possible the on-off switch has worn out or corroded.  Perhaps the wiring connection isn't completing the circuit (could be corroded or full of dirt) or the voltage reaching the heating element isn't correct. 

There's a little sensor that keeps track of the seat heater's temperature called the thermistor.  When the seat is hot enough, it will stop the juice from heating it any more.  Sometimes those fail.  But if all of these components are healthy, you may need a new heater element. 

Those seat-heating elements are made up of wires that get sat on.  A lot.  That can put significant strain on them.  Putting something heavy on the seat can break them. Or, if you put your knees on the seat cushion as you're getting something in a rear seat, that can also damage the element.  Sometimes they can be repaired but often they have to be replaced.  And here is where the technician's expertise comes into play.  That heater element is attached to the seat's fabric and replacing it can be tricky.  It also can require disassembling a lot of the seat to access it. 

Seat heaters are a wonderful feature and they make your vehicle oh, so much cozier.  So keep them working and enjoy the warmth!

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Triple A Automotive Engine Air Filter Replacement

When your experienced Triple A Automotive technician changes your oil, he will also inspect your air filter. You shouldn't need a new air filter at every oil change, but you will need to change it regularly. Heed your technician's auto advice if they tell you to change your air filter.

An air filter does what its name implies: it filters stuff out of the air. Air is drawn into your engine through the filter because your engine needs air to burn fuel. If the filter weren't there, a lot of dust and debris would come into the vehicle engine with the air when you are driving around Clovis. That dust and debris would get hot, burn and produce all kinds of ash and gumminess that would eventually clog up your engine.

Drop in an air filter and voilá! Problem solved.

But air filters themselves get clogged up with all the junk they clean out of the Clovis air. This doesn't allow the junk into the vehicle engine, but it does block up the airflow. A blocked airflow will reduce engine efficiency.

Clovis residents who get a charge out of the feeling of power in their engine might consider upgrading their air filter. Talk to your friendly and knowledgeable Triple A Automotive service advisor. Premium air filters have been proven to increase horsepower and torque. So with the cost of a premium air filter, you can increase the horsepower in your engine — there's no cheaper way to do that!

It's also one of the simplest elements of routine preventive maintenance – and it protects against damage to expensive vehicle electronic systems. No Clovis resident should have an excuse to drive around CA roads and highways with a dirty air filter.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

I Can See Clearly Now: Wiper Blade Replacement in Clovis

About 90% of our driving decisions in the Clovis area are based solely on what we see. So having a good pair of windshield wipers is extremely important.

Most Clovis drivers have experienced the frustration and fear of not being able to see clearly during a storm, or when our vehicle windshield is just dirty. In fact, it's estimated that 46,000,000 drivers across the nation are driving with wipers that can't adequately clear their windshield in a storm.

It seems like our wiper blades are always at their worst when we need them the most. If that sounds like you, you've got plenty of company in the Clovis area. 78% of drivers only change their wiper blades after the blades function so poorly that they become a safety hazard.

Clovis drivers need to change their thinking. Instead of blades being something to replace when they fail, we need to consider wiper blades as vehicle safety component. Then we'll stay ahead of the storm.

Clovis vehicle owners really ought to replace wiper blades twice a year; in the spring and the fall. If you live in the colder parts of CA, you may even want to get special winter blades in the fall.

Winter blades are made to resist freezing. Speaking of winter and freezing Clovis conditions, if your vehicle has been sitting for a long time and the windshield becomes frozen, don't use your wipers to clear off snow and ice. That can shred your blades and may even damage the wiper motor.

Your wiper blades live outside in the freezing cold and blistering sun. Over time, they become hard and brittle, and then tear. They also lose their flexibility and just don't clear the vehicle windshield effectively. Worn wiper blades aren't just a safety hazard for Clovis drivers; they can also scratch their windshield. That may require replacing the entire vehicle windshield – that's the consequence for neglecting such a small part.

Triple A Automotive recommends Clovis drivers replace worn blades right away. We can provide you with a quality replacement blade. At Triple A Automotive, they cost about the same as they would at the store – but installation is included.

Of course you also need washer fluid to help your blades do their work. Even though Triple A Automotive will top off the washer fluid with a full service oil change, it is a good idea to have some extra fluid at home. Take it with you if you're heading out on a road trip.

Always use windshield washer fluid. Plain water, even that fancy French bottled water, just doesn't cut it. It can freeze in the fluid reservoir or on the windshield itself, making things worse. Besides, water won't clean your windows as well.

So follow these tips to keep your windshield clear and your eyes on the road.

Find us at:

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Unlock the Secret (Malfunctioning Door Lock Actuator)

What a convenience power door locks are on a vehicle.  The latest don't even require you to push the button on the key fob; all you have to do is have it with you.  But sometimes there's a component of power door locks that can fail, especially when they are used several times each day.  Those are called the door lock actuators.

The actuator is an electric part that works with others (like motors and gears) to lock and unlock doors.  You can hear them work, sometimes with the little whirr of the gear or the quiet clunk of the lock finishing its cycle.  And it's good to pay attention to that sound because if it starts to sound different, it could be a signal that your lock is on the brink of failing. Another sign of a failing power door lock actuator is they start working intermittently or quickly and erratically.  The driver's door is often the first to start acting up since it's the one that usually gets the most use.

When you start to notice these signs, consider a visit to your service facility to get your vehicle checked out.  If you wait too long, you may find yourself getting locked out of your vehicle. Many vehicles do have mechanical keys available as a failsafe so you are at least able to get inside.  Some of them are hidden inside the key fob and you should know how to access them.  Check with your owner's manual or ask your service advisor.

It's extremely inconvenient to have to unlock your vehicle with the mechanical key, then get inside and unlock the other doors. It's even more inconvenient if you have passengers in the rear seats.  And that doesn't even count having to go through the same thing to lock the doors when you arrive at your destination.

There are many things that can cause power door locks to malfunction, but if it turns out to be a power lock actuator, the most common remedy is to replace it.  Some are easier for technicians to reach than others, depending on your vehicle's design.  But once your locks are working again, you might think you've found the "key" to happiness!

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

A Bright Idea

You've probably noticed how much easier it is to see when you're driving in the daytime as opposed to at night. It's one of the main reasons about half of all fatal vehicle accidents happen when it's dark.

That's why it's important that your vehicle's headlights are in top condition and working the way they should.  That means that they're aimed correctly and producing the amount of light they are intended to produce.

For many years, headlights were a standardized size and shape.  They were what is called a "sealed beam," and when you needed to replace one, it was pretty simple.  You just took the old one out and plugged a new one in. 

But now there are hundreds of different types of lighting systems on vehicles, producing light with such illuminating technology as light-emitting diodes (LEDs), halogen bulbs, high-intensity discharge (HID) bulbs and more.  Some vehicles have systems that turn your lights in the direction you turn your steering wheel so you can more clearly see where you are going.

Now that it's not so simple to change headlamps or bulbs, it's wise to consult your service advisor.  She or he can tell you what your options are.  There may be ways you can upgrade your lighting with new headlamps or components, but it's important not to install new parts that could damage your vehicle.  For example, the headlight housing could be damaged if a bulb burns too hot for its design. 

It's also good to check regulations and laws where you live.  Some regulate the color of light your headlamps can shine and how bright they can be. It's wise to leave it up to a technician to replace your headlamps.  Some are tricky to get at, and modern engine compartments can be packed so tightly, it's hard to maneuver around all of the other engine components to reach the headlamp compartment.

Oh, one other thing to keep in mind.  Even if your headlamps are both working, you might notice people are flashing their lights at you, even when you don't have the high beams on.  That could mean your headlamps are aimed wrong; for the safety of the other drivers and yourself, have your technician check your headlamps' aim.

You'll see the light when you have good visibility at night.