AUTONET TV

Straight and True in Clovis: Wheel Alignment

Most Clovis folks worry about running out of gas or having a breakdown on the side of the road. That is why we practice preventive maintenance on our vehicles — that and to keep our repair bills down. But one important part of preventive maintenance that may get overlooked by drivers in Clovis is a periodic alignment inspection.

Poor alignment causes tires to wear rapidly, unevenly or both. This means they will have to be replaced early, and new tires are more expensive than an alignment check in Clovis. Bad alignment can also cause damage to suspension and steering systems, which can be expensive to repair in Clovis.

Tire wear on misaligned wheels can also lead to blowouts, which are dangerous, can lead to serious accidents and can seriously damage your vehicle. Also, poor alignment itself can be the cause of an accident since the vehicle may not steer properly.

One or more wheels on your vehicle can be knocked out of alignment by running over a curb or a pothole on a bumpy Clovis street. An accident —  even a minor one — that involves a wheel on your car can lead to misalignment. The small bumps and bangs of everyday driving can also gradually put your wheels out of alignment.

If you have had wheel damage to your vehicle, or if you suspect that your wheels are out of alignment, you should get your alignment checked NOW. Any service center will give you that piece of auto advice. But good vehicle care suggests that you also get your alignment inspected on a regular basis. At Triple A Automotive in Clovis, we can take care of that for you.

Your owner's manual or Triple A Automotive can give you a suggestion on how often your alignment should be checked. If it doesn't, then once a year is a good rule of thumb. However, if you drive a lot — and especially if you drive on rough surfaces a lot — then you may want to consider alignment more often. Ask the pros at Triple A Automotive for a recommendation.

If your vehicle is out of alignment, one or more of the wheels is not tracking correctly and will “pull” against the others. Thus, one sign of poor alignment is that your vehicle pulls to one side when you drive around Clovis. Also, if you are driving a straight path and your steering wheel is off-center, that usually indicates an alignment problem.

Clovis drivers should also check the wear on their tires. If they seem to be wearing out too quickly, or if you notice that a tire is wearing on one side more than the other, you should get your alignment checked.

When you get an alignment inspection, your vehicle will be put on a rack and all the parts of the steering and suspension systems will be inspected for wear or damage. The alignment of the tires will be charted and compared to the original factory settings. If no repairs are needed on the steering or suspension systems, the wheels will then be adjusted to bring them back into alignment.

This may seem like a lot of bother for drivers, but it's a lot less trouble than a blowout or an accident. The old adage is good auto advice for all Clovis residents: an ounce of prevention is worth a pound of cure.

So keep on driving, and keep all four tires on the road.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Triple A Automotive Fuel Saving Tip for Clovis: Check Engine Light

Here's a question for Clovis, CA : How long have you been enjoying the romantic glow of your Check Engine light? 

Hey, it's not there to create ambiance; it's a warning that something's wrong. (And, by the way, Homer Simpson's fix of covering it with tape is not a good idea.)

Many conditions that trigger the Check Engine light can hurt your vehicle. A lot.

If your date's eyes are smoldering in the soft glow of the Check Engine light, try to think of all the gas money you'll save by getting it fixed. Give Triple A Automotive a call when you are ready.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Straight Ahead (Wheel Alignment)

If every road was straight and smooth, we wouldn't have to worry much about wheel alignment. But they're not, so we do.  Hitting potholes or driving on rough pavement can knock your vehicle out of alignment and you'll notice it in one of several ways.

Your steering wheel may not be centered when you're driving straight ahead, or your vehicle may pull to one side.  You may find your tires wearing on one side or they may squeal.  All are signs that could point to you needing an alignment.

Your wheels should be perpendicular to the road and parallel with each other.  If not, your tires will wear out faster and your vehicle won't go straight on a level straightaway.

In alignment, there are several factors that must be checked.  One is camber.  Your wheels should be straight up and down if you look at them from the front. If not, you'll wear your tires unevenly on one side.

Another factor is caster, the angle of the steering pivot.  Most vehicles have what's called positive caster, when the top of the steering pivot leans toward the rear.  Proper caster balances steering effort, stability on the highway and cornering.

You may have heard the term "toe" in reference to your wheels.  If you looked at your front wheels from straight above, for example, imagine your wheels were your feet.  If you were to turn your toes in toward each other, that would be toeing in.  The toe of your vehicle should be set to manufacturer's specifications so your vehicle handles well and doesn't prematurely wear out tires.

It's a good idea to have your alignment checked periodically since it can get knocked out by one hard knock or a lot of little knocks.  It's not just about tire wear, it's about ride comfort and safe handling. You may say a vehicle aligned just feels divine.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

The Sign of the Shield (Heat Shield Repair and Replacement)

Even in the months where temperatures are cooler, heat is still an enemy of your vehicle.  When your engine runs, it creates heat, so there are numerous heat shields that protect other parts from those higher temperatures. Heat shields are installed around several areas of the exhaust system.  Others prevent heat from reaching parts of the vehicle.  Still others prevent heat from reaching the ground (or maybe grass underneath) and starting a fire. 

If you remember your space travel history, you'll know how important a heat shield can be. John Glenn was the first American to orbit the earth, but during that maiden orbital flight, a sensor on board was indicating the heat shield on his capsule, Friendship 7, was loose.  If it had come off, his spacecraft could have burned up upon re-entry.  Fortunately, the heat shield stayed on, and Glenn made history.

Unfortunately, the heat shields on your vehicle don't have warning systems like the space vehicles did.  So you have to maintain them.  Heat shields are constantly exposed to elements like water, salt, sand and dirt.  That makes them prone to rusting and corroding.  Here's one unfortunate fact: Materials that make them good at preventing heat transmission also are soft and vulnerable, often aluminum or special fabric. 

One sign a heat shield will give you that it's loose is noise; you'll sometimes hear it rattling underneath your vehicle when it's running. One way to locate it? Put your vehicle in park, leave the engine running and take a listen outside.  It's usually pretty easy to pinpoint the location.

Make a note of the noise when you are talking with your service advisor. It's important to have those heat shields working correctly so the heat is kept away from your other vehicle systems and combustibles on the ground. The good news is that heat shields can frequently be inexpensively repaired or re-attached.  In other cases, they should be replaced. 

Missing or loose heat shields? Let's just say they're not cool.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com