AUTONET TV

Let Triple A Automotive Help You Keep Your Vehicle Another Couple of Years

Clovis area residents may remember when the U.S. government's “Cash for Clunkers” program made a splash on the news scene. People were offered incentives to trade in old vehicles for new, in the interest of better and improved air quality from reduced emissions.

But a lot of Clovis drivers want to hang onto their old clunkers. They're dependable and they're paid for. Owners would love to see the odometers on those vehicles turn past 200,000 miles (320,000 km), as long as the repair bills don't get too expensive.

There are a lot of vehicles on CA roads that have run past the 200,000 mile (320,000 km) odometer reading. Is there something that their owners are doing that keeps these vehicles on the road? Or did they just win the “lemon lottery,” and luck out by getting a particularly good vehicle? Not surprisingly, most of these owners have something in common. They never skip an oil change. Can keeping a vehicle on the road for 200,000 miles (320,000 km) really be that easy for Clovis drivers?

Actually, it makes sense. Oil is the lifeblood of a vehicle. Clean oil ensures that the engine will run efficiently and staves off the build-up of sludge that can eventually damage engine parts. Oil changes remove dirty oil and replace dirty oil filters, keeping an engine clean and running smoothly, just like eating right keeps our hearts healthy by preventing build-up in our arteries.

But there's another reason why not skipping an oil change can result in a longer life for your car. When you bring your car in to Triple A Automotive for an oil change, all of the fluid levels are checked and topped off. If these fluids are depleted, dirty or low, they can damage the engine.

If a fluid is significantly low, it usually indicates a leak somewhere, leading to an inspection of relevant parts. This inspection and the replacement of the worn part can prevent repair bills and maintain the health of the engine.

At an oil change, your technician at Triple A Automotive will also do a quick check for worn belts or hoses, uneven tread wear, leaking shock absorbers and other signs of wear and tear. This advance notice allows the owner to replace parts before they break down and possibly damage your vehicle.

The oil change is also a good time to review any other service that the vehicle might need. Many car owners rely on their pros at Triple A Automotive for good auto advice on check-ups and follow-up vehicle care that will keep older cars running well.

Parts wear out on older vehicles. There's no avoiding it. As the odometer chugs upward toward 200,000 miles (320,000 km), the vehicle will need several batteries, a couple of alternators and water pumps, a new set of shocks and possibly some brake rotors. But these items—all together—add up to far less than the cost of a new vehicle.

Good vehicle care and preventive maintenance are the hallmark of Clovis drivers who have kept their vehicles on the road and running past the age when most of us have given up and headed back to a car lot. We can learn from their wisdom.

So treat your car right: Take good care of it and don't skip the check-ups at Triple A Automotive in Clovis. 

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Not So Hot in Clovis

When the weather turns cold, it's nice to crank up the furnace and enjoy the heat. But if your home's furnace doesn't work, it's not too comfortable. Same goes with your vehicle. When the heater's not working, things can get miserable. It could also signal some major problems, which we'll discuss later.

A vehicle's heating system is fairly complicated. It's made up of several parts, including a blower motor/fan, a heater core and some mechanical and electrical components. In basic terms, a vehicle's engine warms up coolant which is then sent to the heater core (which is kind of like a small radiator) behind the dash. That blower motor sends cold air through the heater core which heats up the air. Voila! Heat.

Diagnosing problems in this system takes a trained mechanic because of the different possible issues. Your heater core may need replacing; they are sometimes in tight spots and may be difficult to work on. Another possible problem could be a defective thermostat, which regulates how the coolant flows through the engine. You may have a leak somewhere in your cooling system. Those leaks may be something as simple as a detached hose clamp or as serious as a bad head gasket. A knowledgeable technician at Triple A Automotive will be able to track the problems down.

For those reasons, it's wise to get your vehicle's heating system repaired. Not only can driving an unheated vehicle on a cold day freeze your fingers, some related engine problems that are not repaired could leave you stranded.

Smart drivers keep up the maintenance on their vehicle's cooling system; it's a hot tip to prevent a cold vehicle.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

Go With the Flow (MAF Sensor Replacement)

A driver brought her vehicle into the shop the other day and told us how she was getting lousy fuel economy and that the engine was running rough.  Plus, the Check Engine light was on.  Our technician checked the code the engine had generated (why the Check Engine light was on) and found the problem.  It was a faulty Mass Air Flow sensor, MAF sensor for short.

This MAF sensor is an important part of your vehicle.  What it does is calculate the amount of air going into your engine.  As you may know, air is taken into your engine where it's mixed with fuel.  Then, the spark plugs fire, that explosive fuel/air mixture detonates, and all these sequential explosions together provide the power to get your vehicle moving down the road. 

It makes sense that if the MAF sensor isn't sending the engine's computers the correct information on the amount of air going in the engine, the fuel/air mixture isn't going to be right. It will either too rich (too much gasoline for the amount of air) or too lean (not enough gasoline for the amount of air).

In this driver's case, the MAF sensor was damaged and needed to be replaced.  Another thing that may cause the MAF to give an incorrect reading is if its wires are dirty or faulty.  So, replacing or cleaning the wires important as well.

Other symptoms that your MAF sensor is bad? If your engine hesitates when you step on the gas, it stalls, or your vehicle is jerky when you accelerate. 

A malfunctioning MAF sensor is not just bad for performance.  Driving with your vehicle in that condition can cause more damage to your engine.  When you bring your vehicle in for us to check, a technician will thoroughly examine your engine to make sure all issues are taken care of.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com

It Pays to Take Care of Your Transmission at Triple A Automotive

If you've been paying attention, you've noticed that vehicle engines are getting more and more powerful in Clovis. At the same time, they are getting better and better fuel economy. I've gotta tell 'ya, most of that's because of technological advances in transmissions. To get a better understanding of why that is, let's talk bicycles.

You've probably seen plenty of cyclists on Clovis roads. Perhaps you ride yourself. Then you know that a cyclist's cadence is the number of times per minute he or she pedals. The ideal pedal speed is the zone where they can most efficiently generate power over a sustained period of time. The experienced CA cyclist uses her gears to keep her pedal speed in the ideal zone whether she's climbing a hill, cruising on a flat stretch or killing a downhill.

Think of it this way: if you have a 1-speed bike, you really have to pump hard to get up to speed. Your top speed is limited by how fast as you can pedal. And if you're climbing a steep CA hill – forget about it.

Now let's add a couple of gears: one lower and another one higher. With the lower first gear, you can get up to your ideal pedal speed more quickly. When you shift to second, your pedal speed drops below ideal for a while as you work to get back to peak efficiency. Same thing happens when you shift to third, but now you can go much faster than you could with a 1-speed bike using the same effort. Add more gears and you can see that it's much easier to maintain ideal pedal speed. The result, quicker starts, better hill climbing, higher top speed and, most of all, a lot less fatigue for the Clovis rider.

Like a cyclist on a bike, every vehicle engine has an ideal engine speed called its power band. When an engine is running in that zone, it can make power very efficiently. It's the vehicle transmission's job to keep the engine in the power band over a wide range of operating conditions. Today 5 or 6 speed automatic transmissions are pretty much the minimum, and 7 and 8 speeds are fairly common in Clovis.

Obviously these sophisticated transmissions are very expensive. In fact, next to your vehicle engine, your transmission is the most expensive component in your vehicle, so it pays to take good care of it. Your manufacturer has a recommended service interval for changing your old, contaminated transmission fluid. Servicing your transmission on schedule at Triple A Automotive keeps it operating at its best and can prevent costly damage. Ask your friendly and knowledgeable Triple A Automotive advisor if it's time for transmission service. Come see why smart Clovis drivers trust their transmissions to Triple A Automotive.

Give us a call.

Triple A Automotive
972 Barstow Suite B
Clovis, CA 93612
(559) 299-9300
http://www.tripleaautomotive.com